HKE
  • H Kandelaars Engineering (Aus) Pty Ltd
  • Australian Hydro Vac Equipment & Sales Pty Ltd
  • Wheelwash Australia Pty Ltd

CALL US NOW +61 3 9308 5915

Engineered to keep
your product moving
BM&M

Official supplier of BM&M products

  • InnerExcavator
  • InnerScreening
  • InnerWheelwash
  • InnerAustralian
  • InnerTruck
  • InnerExcavator
  • InnerScreening
  • InnerWheelwash
  • InnerAustralian
  • InnerTruck

Semi-Trailer Units/Trailers

With its stylish small body, this Vacuum Trailer is able to complete all those hard to reach and small jobs which other trailers and trucks are unable to complete.

HKE has 3 basic specifications;

  • NGE 1000 Series
  • NGE 1500 Series
  • NGE 2000 Series

Specifications can be customised to fit your requirements:


  • 3500-PSI pressure pump with 13HP key start petrol engine.
  • Pump (to specification) driven by 24HP Honda key start petrol engine.
  • 1500 Litre Vacuum tank & 500 litre water capacity.
  • Tank able to be tipped with hydraulic ram.
  • Hydraulic opening rear door with manual locking pins.
  • 12v hydraulic power pack unit.
  • Sight Glass.
  • Pump Silencer.
  • Extra heavy-duty swing up jockey wheel with solid alloy wheel
  • with 1200Kg capacity and swing up bracket.
  • Tandem axle with electric brakes on front.
  • 2" Trailer ball hitch.
  • Height 1950mm.
  • Length 4165mm.
  • Width 1890mm.
  • Dry weight 1920Kg.
  • 3" Inlet, outlet and a 2" sample pot.
  • 415mm Manway / inspection port.
  • 125-litre water tank to cool liquid ring pump with sight glass level which allows you to see the level of cooling water for proper pump operation.
  • Primary shut off valve.
  • Secondary shut off port with sight glass, vacuum gauge and a vacuum relief valve.
  • 15 meters of nylon retractable hose.
  • Two hose trays on either side.
  • Large toolbox on A frame.
  • Tandem axle with electric brakes on front.
  • Two work lights on rear of tank and one at front with

All Hydro Vacuum Tanks can be tailored to fit your application and your truck. All of the vacuum units are manufactured by our skilled engineers.

A typical specification could be:

1875mm dia x length to suit Tank and Component Details;

  • Mild steel shell & torrespherical ends.
  • Internal baffle fitted as surge reduction.
  • Full roll over protection with air operated walkway, mounted inside combing.
  • Top mounted manways hinging to RHS.
  • Low profile primary shut off.
  • Control components stainless pneumatic shut off float fitted into tank.
  • Front mounted secondary shut off fitted with vacuum & pressure relief valves, liquid filled vacuum gauge, sight glass & drain with ba11 valve, male camlock, dust cap & retaining chain.
  • Separator fitted.
  • Rear washout door hinging right.
  • Inlet port with deflector plate & BSP male thread fitted to rear LHS of tank. Nickle plated air actuated brass ball valve with male camIock & dust cap & retaining chain.
  • Dump port with air BSP male thread fitted into the lowest point of washout door. Stainless steel knife valve with male camIock & dust cap & retaining chain, remote access.
  • EPA sample point fitted with ball valve with male camlock, dust cap & retaining chain.
  • Sight glasses fitted at rear.
  • 2 x hose hooks at rear.
  • Calibration with dip stick & guide tube fitted into tank with internal pad is fitted to base of tank.
  • Sign brackets fitted.
  • Rear conduit to suit wiring for rev & work lights.
  • Mounting bracket to suit rev & work lights.
  • Cable carrying rod to suit all wiring.
  • Alloy hose trays fitted each side sloping at the rear of the track drain to the rear with male camlocks & dust caps with retaining chain, (outriggers each side to support / trays).
  • All steel components blasted, primed & painted with two pack
  • All plumbing steel reinforced rubber oil suction hose, clamped with bolted clamps.
  • Trailer complete with Air brakes in accordance with ADR’s all tanks and valving supplied and fitted.
  • Air bag suspension in accordance with ADR’s
  • King pin supplied and fitted
  • Air line fittings and tail light fittings included
  • New tyres and wheels supplied and fitted
  • LED tail lights and rear bumper/underrun fitted “tail light wiring clipped to chassis as standard but sealed conduit and carrol fittings are available
  • The trailer is also supplied with a small toolbox, however further tool storage is available
  • Certification plates
  • Dangerous goods compliance if required.



Vain, Blower and Liquid Ring Pumps are priced and supplied to your specification.

HKE are happy to advise on a specification to suit your application. Contact Us or ring (03) 9308 5915 to learn more.

Subscribe Newsletter

Member Login